| Photon energy | 1486.61eV |
| Spectrum type | survey |
| Resolution | 150 |
| Lens Mode | SmallArea |
| Dwell Time | 0.1 |
| Step size | 0.4 |
| Number of scans | 1 |
| Name | 4. CuO, in 0.1 mbar O2, 300 C |
| Ex situ preparation | Mechanical polishing down to 0.05 microns. Mounted with thermocouple onto a stainless steel sample holder. |
| In situ preparation | Sputter cleaned with Ar ion beam to remove C and O. Annealed in vacuum to 700 C. Heated to 200 C in 0.1 mbar O2 for 8 hours. Increased temperature to 300 C. |
| Additional Information | These spectra were measured after the sample had been transformed to CuO. The data set represents an average of spectra measured over 1.5 hours. |
| Measurement Date | 02-02-2174 |
| Condition | Value | Units |
|---|---|---|
| pressure | 0.1 | mbar |
| temperature | 300 | C |
| ambient composition | O2 | none |
| Analyzer Mode | FAT |
| Area | 0.3 mm diameter |
| Strength | 70 W |
| Source Beam Size | 0.3 mm diameter |
| Take Off Angle | 90 degrees |
| Analyzer Acceptance Angle | 22 degrees |
| Laboratory | Surface Analytics |
| Instrument | Phoibos NAP-150 |
| Protocol | ISO 15472:2010 |
| Calibration date | 04-01-2018 |
| Binding Energy | 83.98 |
| Emission line | Au 4f7/2 |
